Panasonic AG-HPX250EN Panduan Petunjuk Pengoperasian - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Camcorder Panasonic AG-HPX250EN. Panasonic AG-HPX250EN 36 halaman.
Juga untuk Panasonic AG-HPX250EN: Penyesuaian Listrik (20 halaman)
Halaman Cetak
Remove the battery after use.
Completely remove the battery. (The battery
continues to be used even if you have turned the
camera-recorder off.)
The battery can over discharge if you leave it in the
camera-recorder and it may become impossible to
recharge it.
Do not remove the battery when the power is on.
If the battery is removed, make sure that the power
is off and the mode lamp completely lights off.
Take proper care of the battery terminal.
Keep dust and other foreign objects away from the
battery terminal.
If the battery is dropped, make sure that the
body and terminal portion of the battery are not
deformed.
If a deformed battery is inserted into the camera-
recorder or placed on the AC adaptor, the camera-
recorder or AC adaptor may be damaged.
What to remember when throwing memory
cards away or transferring them to others
Formatting memory cards or deleting data using
the functions of the unit or a computer will merely
change the file management information: it will
not completely erase the data on the cards. When
throwing these cards away or transferring them
to others, either physically destroy them or use a
data deletion program for computers (commercially
available) to completely erase the data. Users are
responsible for managing the data on their memory
cards.
Liquid crystal displays
• Images or letters can get burned onto the screen
of the LCD or viewfinder if they are displayed for
a long time, but you can fix this by leaving the
camera-recorder off for several hours.
• The liquid crystal parts are highly precise with
99.99% of the pixels effective. This leaves less
than 0.01% of pixels that may not light or may
remain on all the time. These phenomena are
normal and will have no effect on the images you
shoot.
• Condensation may form if you use the camera-
recorder where temperatures fluctuate. Wipe dry
with a soft, dry cloth.
• The LCD may appear dim after immediately
turning on a cold camera-recorder, but will
brighten as the camera-recorder warms up.
Do not point the lens or viewfinder at the sun.
Doing so may damage the parts inside.
Protective caps for the connectors
Keep the protective caps fitted over any connectors
that are not being used.
13