Chrysler TOWN & COUNTRY 2016 Panduan Pengguna - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Mobil Chrysler TOWN & COUNTRY 2016. Chrysler TOWN & COUNTRY 2016 20 halaman.

G E T T I N G S T A R T E D

VEHICLE SECURITY ALARM

The Vehicle Security Alarm monitors the vehicle doors for unauthorized entry and the ignition for

unauthorized operation. While the Vehicle Security Alarm is armed, interior switches for door

locks and decklid release are disabled. If something triggers the alarm, the Vehicle Security Alarm

will provide the following audible and visible signals: the horn will pulse, the park lamps and/or

turn signals will flash, and the Vehicle Security Light in the instrument cluster will flash.

To Arm

• Keyless Enter-N-Go button installed: Push the Keyless Enter-N-Go START/STOP button

until the Electronic Vehicle Information Center (EVIC) indicates that the vehicle ignition is

"OFF." Push the power door LOCK switch while the door is open, push the Key Fob LOCK

button, or with one of the Key Fobs located outside the vehicle, and within 5 ft (1.5 m) of the

driver's and passenger front door handles, push the Keyless Enter-N-Go LOCK button

located on the door handle.

• Keyless Enter-N-Go button not installed: Turn the ignition switch to the "OFF" position.

Push the power door lock switch while the door is open, push the Key Fob LOCK button with

one of the Key Fobs located outside the vehicle and within 5 ft (1.5 m) of the driver's and

passenger front door handles.

NOTE:

After pushing the Keyless Enter-N-Go LOCK button, you must wait two seconds before you can

lock or unlock the vehicle via the door handle.

To Disarm

• Keyless Enter-N-Go button installed: Push the Key Fob UNLOCK button or with one of

the Key Fobs located outside the vehicle and within 5 ft (1.5 m) of the driver's and passenger

front door handles, grab the Keyless Enter-N-Go door handle and enter the vehicle, then push

the Keyless Enter-N-Go START/STOP button (requires at least one valid Key Fob in the

vehicle).

• Keyless Enter-N-Go button not installed: Push the Key Fob UNLOCK button or with one

of the Key Fobs located outside the vehicle and within 5 ft (1.5 m) of the driver's and passenger

front door handles, grab the Keyless Enter-N-Go door handle and enter the vehicle, then turn

the ignition to the ON/RUN position.

OCCUPANT RESTRAINT SYSTEMS

Some of the most important safety features in your vehicle are the restraint systems:

• Seat Belt Systems

• Supplemental Restraint Systems (SRS) Air Bags

• Child Restraints