Diamond HD1412/P Panduan Pemasangan, Penggunaan, dan Pemeliharaan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemasangan, Penggunaan, dan Pemeliharaan untuk Pembeku Diamond HD1412/P. Diamond HD1412/P 9 halaman.

Halaman Cetak

1.1 CLEANING

Now that our cabinet is correctly installed, we must proceed to cleaning it:

The first cleaning must be carried out with water and neutral detergent. Once clean and dry, insert

the accessories in the appropriate places, as you prefer.

We recommend cleaning the outside of the unit daily with a damp cloth and following the direction

of the stainless steel's polished finish. Abrasive substances or those containing chlorine must not be

used. Rinse with clean water, avoiding direct water jets.

CONNECTION

1.2 GENERAL

Before connecting the cabinet to the socket, check that the network voltage and frequency

correspond to those indicated on the appliance's nameplate.

It is essential that the electrical installation where the cabinet is going to be connected

has an EARTHING SOCKET, in addition to the appropriate magneto-thermal switch and

differential protection (we recommend 30 mA)

Check that the section of the electricity socket is appropriate for the consumption it is going to

withstand. It must be a Schuko type socket, as your cabinet's cable is this type (also called F type

and in the EEC 7/4"), with a 4.8 mm terminal and earthing socket.

For your safety, it is prohibited to lengthen this power cable. Do not insert any elements through the

fan guard or refrigerator equipment area grilles. The place where the unit is going to be installed

must be perfectly levelled. In the fish cabinets, the cabinet's drainpipe must be connected to the

general drainage system. This will be carried out according to local regulations.

In the start-up, ensure that there are no sources of heat nearby. For the perfect operation of the

components making up the refrigerator system, it is extremely important that the air intakes, both

from the fan situated inside the cabinet and the air access to the condenser not be blocked.

Do not install the cabinet outdoors.

A cabinet consumption table for adjusting the protection is attached

MOD.

HE706/P

HD706/P

HD1412/P

HE1412/P

A[max]

230v 50Hz

4,1

230v 50Hz

2,3

230v 50Hz

3,0

230v 50Hz

6,5

PORT.

W[watt]

GENERAL

600

400

415

996

10A

DIS.

DIF.

30 mA