Chubb QUELL 135988 Panduan Pengguna - Halaman 14
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Alarm Asap Chubb QUELL 135988. Chubb QUELL 135988 19 halaman. Worry-free smoke alarm
Halaman Cetak
7. BATTERY
BATTERY ACTIVATION AND DEACTIVATION
NOTE: One Lithium-Ion battery, permanently sealed inside the alarm, powers this unit;
no battery installation or replacement is necessary for the life of the alarm.
IMPORTANT: Constant exposure to high or low humidity may reduce battery life.
!
WARNING! DO NOT ATTEMPT TO OPEN THE ALARM FOR ANY REASON!
Do not try to repair the smoke alarm yourself. No serviceable parts included.
Low battery: This alarm is equipped with a low battery monitor circuit which will cause
the alarm to produce a single "chirp" approximately every 60 seconds and blink the
Red LED every 30 seconds, for 30 days should the battery become low.
T HE UNIT MUST BE DEACTIVATED (see "Deactivation of Alarm" section) and
replaced within 30 days of the first occurrence of the "Low Battery Warning" to provide
continuous alarm protection.
8. DEACTIVATION OF ALARM
WARNING!
!
a. Deactivation of the alarm is permanent. Once the alarm has been
deactivated, it cannot be reactivated!
b. Once deactivated, the alarm will NO LONGER DETECT SMOKE.
c. Once the alarm is deactivated the battery will be depleted and the alarm
will no longer function.
d. Once the alarm has been deactivated, it cannot be mounted onto the
mounting plate or reactivated.
WARNING! Failure to turn off alarm as instructed prior to disposal may
!
create potential for lithium battery related fire or hazard.
This model is equipped with a
feature that automatically activates
the alarm when the alarm is attached to
the mounting plate for the first time.
Failure to turn off alarm
WARNING:
as instructed prior to
disposal may create potential for
lithium battery related fire or hazard.
Turn Off Alarm Here
-Turning Off Alarm is
Permanent, Dispose of
Alarm Afterwards!
Pressing the white small
button will turn off alarm.
Turn off and replace alarm
when end of life or low
battery status has been reached.
END OF UNIT LIFE: Two chirps
every 30 seconds indicates the end
of unit life. Pressing the Test/Hush
button will stop the end of unit life
signal for 3 days.
TO DEACTIVATE THE ALARM:
Remove the alarm from the mounting plate by rotating
it in the direction indicated by the arrows on the cover
of the alarm.
Pressing the white small button will turn off alarm.
This will deactivate the alarm, stop the low battery "chirp"
and render the alarm safe for disposal by draining
the battery.