AQUASONIC AQ339 Panduan Instalasi - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Pembicara AQUASONIC AQ339. AQUASONIC AQ339 12 halaman. Underwater loudspeakers
Juga untuk AQUASONIC AQ339: Panduan Instalasi (12 halaman)

Halaman Cetak

Find a length of rope (1/8" to 1/4" outside diameter) that will allow you to place the speaker in the area

of the pool where you would like sound (see General Information section at the beginning of this manual

for precautions when using this type of application). Carefully remove the speaker from its box. Locate the

open hole on the speaker's rubber ring (next to the interlaced speaker wire). Thread the rope through the

hole. Tie a knot that will not come undone or slip through the hole.

Connect the speaker to your audio system with the attached speaker wire. Carry the speaker to the pool

using the rope (NEVER CARRY THE SPEAKER BY THE SPEAKER WIRE! THIS WILL DAMAGE THE

SPEAKER!). Gently lower the speaker into the pool, insuring the speaker and wire are not scratching along

the wall of the pool (NEVER THROW THE SPEAKER INTO THE WATER. THIS WILL DAMAGE THE

SPEAKER AND MAY CAUSE PERSONAL INJURY). When the speaker is under the water at the desired

depth, insure the sound lens is facing away from the wall and allow the speaker to rest against the wall. Tie

the rope to a sturdy object (noting the precautions listed in the front of this manual).

Underwater Speaker