Panasonic WV-SC385 Panduan Instalasi - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Camcorder Panasonic WV-SC385. Panasonic WV-SC385 40 halaman. Ip video cameras
Juga untuk Panasonic WV-SC385: Spesifikasi (2 halaman), Panduan Instalasi (36 halaman), Panduan Instalasi (40 halaman), Grafik Perbandingan (6 halaman), Panduan Instalasi (40 halaman), Catatan Integrasi (8 halaman)

Halaman Cetak

Guide part

Lock plate

Moving part

Camera

Important:

• When mounting the camera onto the camera mount

bracket, hold the base part of the camera. Mounting

the camera while holding the moving part may result

in malfunction.

Step 7

Fix the camera on the camera mount bracket (accessory)

using the camera fixing screw (accessory).

Recommended tightening torque: 0.68 N·m

{0.50 lbf·ft}

Fixing screw

(accessory)

Center of the

camera mount bracket

Base part

Camera mount bracket

(accessory)

Step 8

Connect the cables to the network connector and the

power inlet.

Important:

• When the power of the camera is turned on, the cam-

era will start panning and the position will automati-

cally be initialized.

• Do not touch the camera in the process of initializa-

tion. Otherwise, it may fail to initialize and may cause

malfunction.

• When the camera has been inadvertently touched

and moved after the initialization is complete, the pre-

set positions may be inaccurate. In this case, use the

position refresh function or restart the camera to cor-

rect the preset positions.

Refer to the Operating Instructions (included in the

CD-ROM) for further information.

Network connector

12 V DC power supply terminal

10BASE-T/

100BASE-TX

POWER

LINK

ACT

INITIAL

SET

12V IN

• Network connector

Connect a LAN cable (category 5 or better, STP*) to the

network connector.

* For Europe

Important:

• Use all 4 pairs (8 pins) of the LAN cable.

• The maximum cable length is 100 m {328 feet}.

• Make sure that the PoE device in use is compliant

with IEEE802.3af standard.

• When connecting both the 12 V DC power supply

and the PoE device for power supply, 12 V DC will be

used for power supply.

Depending on the PoE device used, the power supply

lamp may not light and the network connections may

not be possible. In this case, disable the PoE device

setting, and refer to the operating instructions of the

PoE device in use.

• When the LAN cable is disconnected once, reconnect

the cable after around 2 seconds. When the cable is

quickly reconnected, the power may not be supplied

from the PoE device.

EXT I/O

MIC/LINE IN

AUDIO OUT

MONITOR OUT

4 3 2 1