Panasonic WV-SP105 Panduan Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Camcorder Panasonic WV-SP105. Panasonic WV-SP105 36 halaman. Ip video cameras
Juga untuk Panasonic WV-SP105: Spesifikasi (2 halaman), Spesifikasi (2 halaman), Lembar data (2 halaman), Grafik Perbandingan (6 halaman), Catatan Integrasi (8 halaman)

Halaman Cetak

Cleaning this product body

Be sure to turn off the power before cleaning.

Do not use strong abrasive detergent when

cleaning this product. Otherwise, it may cause

discoloration.

When using a chemical cloth for cleaning, read

the caution provided with the chemical cloth

product.

When the dirt is hard to remove, use a

mild detergent and wipe gently.

When the dirt is hard to remove, use a mild

detergent and wipe gently. Then, wipe off the

remaining detergent with a dry cloth.

Transmission interval

Image transmission interval may become slow

depending on the network environment, PC

performance, shooting subject, access num-

ber, etc.

Code label

The code labels (accessory) are required at

inquiry for trouble. Use caution not to lose

these labels. It is recommended to paste one

of the labels onto the CD-ROM case.

Discoloration on the color filter of the

MOS image sensor

When continuously shooting a bright light

source such as a spotlight, the color filter of the

MOS image sensor may have deteriorated and

it may cause discoloration. Even when chang-

ing the fixed shooting direction after continu-

ously shooting a spotlight for a certain period,

the discoloration may remain.

AVC Patent Portfolio License

This product is licensed under the AVC Patent

Portfolio License for the personal and noncom-

mercial use of a consumer to (i) encode video

in compliance with the AVC Standard ("AVC

Video") and/or (ii) decode AVC Video that was

encoded by a consumer engaged in a personal

and

non-commercial

activity

and/or

was

obtained from a video provider licensed to pro-

vide AVC Video. No license is granted or shall

be implied for any other use. Additional infor-

mation may be obtained from MPEG LA, LLC.

See http://www.mpegla.com.

Flickering

Due to the influence of lighting, flickering may

sometimes happen. In this case, select "Indoor

scene" for "Light control mode". Select "Indoor

scene(50Hz)" or "Indoor scene(60Hz)" in accor-

dance with the power supply frequency in your

locality. Refer to the Operating Instructions

(PDF) for further information about the setting.

Under extremely strong lighting, flickering may

happen even when "Indoor scene" is selected

for "Light control mode".

When the brightness (illuminance) level on the

screen is set to a relatively low level with the

[Brightness] buttons, flickering may frequently

happen. In such cases, either of the following

can reduce flickering.

• Moderate the illumination intensities of

objects by changing the camera direction.

• Set the brightness (illuminance) level on the

screen to a brighter level with the

[Brightness] buttons.

White-out on images caused by the effect

of light control mode

When "Indoor scene" is selected for "Light con-

trol mode", the tone of the brighter parts on the

screen may be deteriorated than the case

when "ELC" is selected.

Color blurring on detailed drawing pat-

terns

When there are detailed drawing patterns on

images, color blurring may happen over these

parts.

White dot noise

When the brightness levels of objects are too

low, white dot noise may appear on the screen.