Panasonic WVNP1000 - NETWORK CAMERA Panduan Petunjuk Pengoperasian - Halaman 10
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Camcorder Panasonic WVNP1000 - NETWORK CAMERA. Panasonic WVNP1000 - NETWORK CAMERA 28 halaman. Ip video cameras
Juga untuk Panasonic WVNP1000 - NETWORK CAMERA: Manual (2 halaman), Catatan Integrasi (8 halaman)
Halaman Cetak
Major Operating Controls and Their Functions
Cover for the
operation buttons
<TOP>
Safety wire holder
10
Microphone
Inside the cover for the operation buttons
(Slide to the left until the cover is locked.)
INITIAL SET (UP)
NEAR
ABF/MENU
(LEFT)
(SET) (RIGHT)
(DOWN)
[INITIAL SET] button
• About the [INITIAL SET] button
Turn on the power of the camera while holding down this button, and wait for around 5 seconds without releasing
this button. Wait another 30 seconds after releasing the button. The settings including the network settings will be
initialized. However, the settings edited on the [Camera] tab of the "Camera setup" page will not be initialized.
SD memory card slot cover
Screw holes for the camera mounting bracket (1/4-20UNC)
Tripod mount base
Operation buttons
* In these operating instructions, names of the buttons are as follows.
[UP] button
FAR
[DOWN] button
[LEFT/NEAR] button
[RIGHT/FAR] button
[SET, ABF/MENU] button
<BOTTOM>
Screw hole for the camera mounting bracket (1/4-20UNC)
Fixing screw for transportation
* Remove the fixing screw for transportation
before connecting the power cable.
ALC lens connector