Panasonic WVNP1000 - NETWORK CAMERA Panduan Petunjuk Pengoperasian - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Camcorder Panasonic WVNP1000 - NETWORK CAMERA. Panasonic WVNP1000 - NETWORK CAMERA 28 halaman. Ip video cameras
Juga untuk Panasonic WVNP1000 - NETWORK CAMERA: Manual (2 halaman), Catatan Integrasi (8 halaman)
Halaman Cetak
Configure the Settings Using the Operation Buttons on the Camera
Each setup item on the [Camera] tab of the "Camera setup" page can be configured using the operation buttons on the cam-
era. The settings relating to image quality, brightness, privacy zone and back focal length can be configured on the [Camera]
tab of the "Camera setup" page. When using the operation buttons, configure the settings while displaying the "Camera" tab
page on the video monitor.
The following are descriptions about the setup items on the [Camera] tab and of how to configure them using the operation
buttons on the camera.
Refer to the operating instructions (PDF) for further information about the [Camera] tab.
Settings items of the camera setup page
Settings item
CAMERA
CAMERA ID
ALC/ELC
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
DNR
BW MODE
PRIVACY ZONE
EL-ZOOM
STABILIZER
BACK-FOCUS
SPECIAL
CHROMA GAIN
AP GAIN
PEDESTAL
PIX OFF
CAMERA RESET SETUP
NETWORK
Description
Configure the settings relating to camera operations
The camera title can be edited and displayed on the screen.
Select the light control method from "ALC", "ALC+" and "ELC" according to the lens in
use.
Select the shutter speed.
Select the method of the gain adjustment.
Adjust the sensitivity.
Display the method of the synchronization.
Select the method of the white balance adjustment.
Configure the settings for the DNR (Digital Noise Reduction) function.
Configure the settings relating to the BW mode such as the settings for switching
between the color mode and the BW mode.
It is possible to mask a designated zone and as a privacy zone.
Adjust the electronic zoom.
Select "ON" or "OFF" to determine whether or not to use the image stabilizer to prevent
shaky images.
Select the method of the back focal length adjustment and adjust the back focal length
minutely.
Adjust the chroma level (color density).
Adjust the aperture level.
Adjust the pedestal level (brightness).
Correct image defects such as pixel failure.
Reset the settings edited on the [Camera] tab to the default settings.
Configure the network settings.
19