Panasonic WVNP1000 - NETWORK CAMERA Panduan Petunjuk Pengoperasian - Halaman 23
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Camcorder Panasonic WVNP1000 - NETWORK CAMERA. Panasonic WVNP1000 - NETWORK CAMERA 28 halaman. Ip video cameras
Juga untuk Panasonic WVNP1000 - NETWORK CAMERA: Manual (2 halaman), Catatan Integrasi (8 halaman)
Halaman Cetak
Troubleshooting
Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution or if the problem is not
described below.
Symptom
The power cannot be turned
on.
Check the power cable, AC inlet and the power plug periodically.
Symptom
The power cable insulation is
damaged.
The power cable, AC inlet or
the power plug are hot during
use.
The power cable gets warm or
hot if bent or pulled during use.
Cause/solution
When using AC 24V power supply (WV-NP1004)
• Is the power cable connected to the AC 24V power
supply?
→ Confirm the cable is firmly connected.
When using AC 230V power supply (WV-NP1000)
• Is the power cord connected to the AC inlet firmly?
→ Confirm the power cord is firmly connected to the
AC inlet.
Cause/solution
• The power cable, AC inlet or the power plug is damaged.
If you continue to use it, a fire or an electric shock may occur.
Unplug the power plug immediately, and refer servicing to qualified service
personnel.
Reference pages
15
Reference pages
23