Precautions
Refer to all work related to the installation
of this product to qualified service person-
nel or system installer.
Do not attempt to disassemble the prod-
uct.
There are no serviceable parts inside.
Contact the qualified service personnel for
maintenance.
Use this appliance for indoor use only.
Do not expose the appliance to direct sun-
light for hours and do not install the product
near
a
heater
Otherwise, it may cause deformation, discol-
oration and malfunction. Keep the appliance
away from water and moisture.
To keep on using with stable performance
• Parts of this product may deteriorate and
it may shorten lifetime of this product
when using in locations subject to high
temperatures and high humidity. Do not
expose the product to direct heat such
from a heater.
• Use the appliance at temperature within
+5 °C - +35 °C (41 °F - 95 °F) and
humidity below 90 %. (when using the
appliance without turning the power off)
Handle the appliance with care.
Do not strike or shake, as this may damage
the appliance. It may cause a malfunction.
About the PC monitor
When displaying the same image on the PC
monitor at length, the PC monitor may be
damaged. It is recommended to use a
screen-saver.
When an error is detected, the camera will
restart automatically.
This camera will restart when detecting an
error caused by any reason. The camera will
be inoperable for around 30 seconds after
8
or
an
air
conditioner.
the restart just as when the power is turned
on.
Cleaning the camera body
Turn the power off when cleaning of the cam-
era. Use a dry cloth to clean the camera.
When the dirt is hard to remove, use a mild
detergent and wipe gently. Then, wipe with a
dry cloth.
Do not use strong abrasive detergent
when cleaning the camera body.
Otherwise, it may cause discoloration.
When using a chemical cloth for cleaning,
read the caution provided with the chemical
cloth product.
Cleaning the lens
Use a lens cleaning paper (used to clean
camera lenses or lenses of spectacles).
When using solvent, use an alcohols solvent.
Do not use a thinner or a glass cleaner.
SD memory card
• When insert an SD memory card into the
SD memory card slot, turn the power of
the camera off. Otherwise, it may cause
malfunction or damage data recorded on
the SD memory card.
Refer to page 18 for descriptions of how
to insert/remove an SD memory card.
• When using an unformatted SD memory
card, format it using this camera.
Recorded data on the SD memory card
will be deleted when formatted.
If using an unformatted SD memory card
or using an SD card formatted with other
device, the camera may not work proper-
ly or performance deterioration may be
caused.
Refer to the Network Operating Instruc-
tions (PDF) for descriptions of how to for-
mat an SD memory card.
• It is recommended to use Panasonic's
SD memory card.
Halaman Cetak