Panasonic CT-20S12S Panduan Petunjuk Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk TV Panasonic CT-20S12S. Panasonic CT-20S12S 28 halaman.
Halaman Cetak
Installation
Location
Locate for comfortable
viewing.
Avoid placing
where sunlight
or other bright light (including
reflections)
will fall on the
screen.
Adecluate
ventilation
is essential
to prevent
internal
component
failure.
Keep away from areaLs of excessive
heat or
moisture.
Do not position
magnetic
equipment
(motors,
fans, other speakers,
etc.) nearby.
Optional External Equipment
Connections
The Video/Audio
connections
between
components
can be made with shielded
video and audio cables. For best perfor-
mance, video cables
should
utilize 75 ohm coaxial
shielded
wire. Cables
are available
from you" dealer
or electronic
supply
house.
Before you purchase
any cables,
be sure you know what type of output and input connectors
your various components
require.
Also determine
the length of cable you'll need.
AC Power Supply Cord
Insert (Polarized)
plug into 120 volts 60mz standard
AC outlet.
Do not defeat
the safety
purpose
of the polarized
plug.
CAUTION:
TO PREVENT
ELECTRIC
SHOCK
DO NOT USE THIS (POLARIZED)
PLUG
WITH AN EXTENSION
CORD, RECEPTACLE
OR OTHER
OUTLET
UNLESS THE BLADE
CAN BE FULLY
INSERTED
TO PREVENT
BLADE
EXPOSURE
Polarized
Plug
Remote Control
Battery Installation
& Replacement
Battery
Installation
Batteries: Use two "AA" batteries.
1. -Iurn the Transmitter face down. To remove bottom cover, press down on
marking and slide cover off in the direction indicated.
2.
Install the batteries as shown in the battery compartment. (Polarity (+) or
(-) must be correct.)
3.
Replace the cover and slide in reverse until the lock snaps.
Precaution
on Battery
Use
Incorrect
installation
can cause
battery
leakage
and corrosion
that will
damage
the Remote
Control Transmitter.
Observe the Following Precautions:
1.
Batteries must be replaced as a pair.
2.
Do not combine a used battery with a new one.
3.
Do not mix battery types (Example: "Zinc Carbon" with "Alkaline").
4.
Do not attempt to charge, short-circuit, disassemble, heat, or burn used
batteries.
5.
Battery
replacement
is necessary
when
Remote
Control
reacts
sporadically or stops operating the Receiver.
LIIII
I
-=_=-
G ®
b
b
Q ®
_
J
5