Panasonic CT-27D11 Panduan Petunjuk Pengoperasian - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk TV Panasonic CT-27D11. Panasonic CT-27D11 25 halaman. 36" diagonal stereo monitor-receiver
Juga untuk Panasonic CT-27D11: Panduan Petunjuk Pengoperasian (50 halaman), Panduan Petunjuk Pengoperasian (50 halaman)
Halaman Cetak
2
TUNER
PICTURE
IN PICTURE
(PIP)
OPERA
TION
2 Tuner Picture In Picture (PIP) Operation
Note:
Refer to the FEATURE COMPARISON CHART on page 3 for your television PIP capabilit_
PIP Operation
with a VCR and Cable Box
This
television
includes
a two
tuner
Picture
In Picture
(PIP)
feature.
This
allows
watching two (2)
live broadcasts
at the same
time without
or with an external
video
source
(VCR).
Without
A VCR
(External
Video Source)
Procedure
1.
Connect incoming cable to antenna (ANT) input on back of TV.
2.
Press the PIP button on the Remote Control to display the PIP frame.
Note:
The audio is for the Main Picture only.
3.
Choose channels for the PIP frame by pressing the Remote Control PIP CHANNEL
up/down buttons.
4.
Choose channels for the Main Picture by pressing the Remote Control
CH up/down buttons or by using the numeric keypad.
With A VCR (External
Video Source) And Cable Box
Connect your television to a VCR and Cable Box, as shown.
VCR
CABLEBOX
ViDEOOUT
_
NOT SUPI=LIED
®
®
Note:
The Remote Control must be programmed with supplied codes to operate the VCR and Cable
Box. See Programming the Remote Control in the Remote Control Quick Reference Guide.
Procedure
Press the PIP button
on the Remote
Control
to display
the PIP frame.
Note:
The audio is from the Main Picture only.
To view scrambled channels through your Cable Box in the PIP frame:
1.
Press the TV/VIDEO button on the Remote Control to select the same video input to
which your cable box is connected.
2.
Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3.
3.
Choose channels for the PIP frame by pressing the CBL button on the Remote Control
and using the numeric keypad or PIP CHANNEL
up/down buttons.
4.
Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or CH up/down buttons.
Note:
The SWAP button switches
the on screen PIP and Main Picture source.
Press the
RECALL button for PIP and Main Picture source status.
[]