Panasonic CT-27D11D, CT-27D31C, CT-2772SC, CT-32D11C, CT-32D31C, CT-3274SC, CT-36D11C, CT-36D31C Panduan Petunjuk Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk TV Panasonic CT-27D11D, CT-27D31C, CT-2772SC, CT-32D11C, CT-32D31C, CT-3274SC, CT-36D11C, CT-36D31C. Panasonic CT-27D11D, CT-27D31C, CT-2772SC, CT-32D11C, CT-32D31C, CT-3274SC, CT-36D11C, CT-36D31C 25 halaman. Panasonic color television operating instructions ct-27d11d, ct-27d31c, ct-2772sc, ct-32d11c, ct-32d31c, ct-3274sc, ct-36d11c, ct-36d31c
Juga untuk Panasonic CT-27D11D, CT-27D31C, CT-2772SC, CT-32D11C, CT-32D31C, CT-3274SC, CT-36D11C, CT-36D31C: Panduan Petunjuk Pengoperasian (50 halaman)

Halaman Cetak
Optional
Cable
Connections
Shielded audio and video cables should be used between components.
For best
results:
O
Use 75-ohm coaxial shielded cables.
-[3
Use appropriate input and output connectors, that match your component connectors.
[]
Avoid long cables to minimize interference.
AC Power
Supply
Cord
CAUTION:
TO PREVENT
ELECTRIC
SHOCK
MATCH WIDE
BLADE OF PLUG TO WIDE SLOT OF AC OUTLET AND FULLY
INSERT. DO NOT USE A PLUG WITH A RECEPTACLE OR OTHER
OUTLET
UNLESS
THE BLADE
CAN BE FULLY INSERTED
TO
PREVENT BLADE EXPOSURE.
Polarized plug
PROTECT
POWER
CORDS
FROM
BEING
WALKED
ON,
ROLLED
OVER,
CRIMPED,
BENT OR PINCHED,
PARTICULARLY
AT PLUGS,
CONVENIENCE
RECEPTACLES, AND THE POINT WHERE THEY EXIT FROM THE APPARATUS.
Cable / Antenna
Connection
For proper reception, either a cable or antenna connection is required.
Cable Connection
Incoming
Cable from
Cable Company
Connect
the cable supplied by your local cable company.
Note:
A cable converter
box may be required
for proper reception.
Check
with
your
local
cable
company
for
compatibility
requirements,
Antenna Connections
[]
O
75 Ohm VHF/UHF
on back of TV
For proper reception of VHF/UHF
channels,
an external antenna is required.
For best
reception an outdoor antenna is recommended.
Antenna Mode must be set to TV.
-- _
Ca_Preset
_o_e
factory, Antenna
users must change to Antenna Mode in the
I Setup Menu,
Incoming
Cable from
Home Antenna
a