Diamond Audio Technology D672 Panduan Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Speaker Mobil Diamond Audio Technology D672. Diamond Audio Technology D672 8 halaman. D6 series convertible speakers
Halaman CetakD6 CONVERTIBLE SPEAKER SYSTEMS
FEATURES
• Hard Annodized Aluminum Cone
• Rubber Surround
• High Density Proprietary Composite Frame
• Flat Progressive Spider
• Inductively Controlled Motor Design
• Rubber Boot Magnet Protector
• Model Specific Crossovers
Step 1 - Remove Boot
Carefully remove the rubber
boot from the magnet.
Step 2 - Unscrew Phase Plug
Twist phase plug in a counter-
clockwise direction.
Step 3 - Assemble Tweeter Post
Carefully feed the tweeter wires through
the holes and snap tweeter into place on
top of the post .Secure with screw.
Firmly grasp the
tweeter post and turn
to unlock until you
feel a "click".
CONVERTIBILITY
Your new D6 speaker system has the unique ability to
be used as either a component or a coaxial speaker.
Depending on your installation requirements, the tweeter
can be installed separately or mounted directly to the
midbass/midrange unit with the supplied kit. This
provides for the most installation flexibility possible.
See the drawing below for more details.
Removing the Tweeter
©2008 Diamond Audio Technologies. All rights reserved.
Step 4 - Attach Tweeter
Carefully feed the tweeter wires through
the post and through the magnet.
Step 5 - Attach Tweeter Wires
Attach the tweeter wires to their
Step 6 - Carefully Replace Boot
Carefully replace the motor boot to
cover and protect the tweeter wires.
After you feel the "click" of
the tweeter post unlocking,
carefully pull the post straight
up from the cone.
3
proper terminals.