Diamond Group The piranha II Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penggiling Diamond Group The piranha II. Diamond Group The piranha II 12 halaman. Tungsten grinder
Halaman Cetak2. SPECIFICATIONS
Range of Included Angle:
Electrode Diameters:
Minimum Electrode Length: 1.75" ( 44.5mm)
Voltage:
Power Consumption:
Motor:
Length:
Width:
Height:
Weight:
3. WARRANTY
The Piranha II Tungsten Grinder comes with a one-year warranty on parts and labor, excluding the diamond-
grinding wheel that is a consumable part that naturally wears over time. This warranty also excludes abuse to
the machine, dropping of the unit or improper handling by the operator.
4. SAFETY
Before any work is done, read the caution below carefully. Working safely prevents accidents.
• When not in use, turn the grinder off for safety purposes and to decrease wear on the machine.
• Wear proper apparel. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry, which
may get caught, in moving parts of the machine.
• Wear protective hair covering to contain long hair.
• Wear safety glasses and a facemask.
• Be alert and think clearly. Never operate power tools when tired, intoxicated, or when taking medication that
may cause drowsiness.
• Work area should have sufficient lighting.
• A proper electrical outlet should be available for the tools. A three-prong plug should be plugged directly into
a three-prong outlet. Extension cord should be the correct gauge.
• Keep visitors at a safe distance from work area.
• Always unplug grinder prior to inspection.
• Read this manual thoroughly for specific adjustments and operating procedures.
• Do not perform "make-shift" repairs. Any part that is damaged should be promptly replaced.
• Only use the grinder for its intended purpose. Do not use it for a job it was not designed for.
• Make sure that the grinder is off before plugging it in.
• Do not apply extreme force on the tungsten while grinding. This may cause your grinder to jam or cause
pre-mature grinding wheel wear.
• Never leave the grinder unattended. Turn the grinder off first and do not leave it until it comes to a complete stop.
• Keep hands away from moving parts.
• Know your grinder; learn its operation, applications, and specific limitations.
Document: DGP-MANUAL-P2 | Piranha II Product User Manual | Released: 5/13 Rev. C
10° - 60°
.040"(1.0mm), 1/16" (1.6mm), 3/32" (2.4mm)
110/120 VAC, 50/60Hz, 220v
70 Watts
1/10 hp, 8,000 rpm, 1.5 amps
7.8" (199mm)
4.0" (102mm)
61" (155mm)
14 lbs (6.35kg)
Page 4