Panasonic AG-HPX250P Panduan Petunjuk Pengoperasian - Halaman 21
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kamera Digital Panasonic AG-HPX250P. Panasonic AG-HPX250P 36 halaman.
Juga untuk Panasonic AG-HPX250P: Penyesuaian Listrik (20 halaman)
Halaman Cetak
Power sources
Using the battery
Installation
Insert the battery until it clicks into place.
Using the AC adaptor
Installation
1
Insert the DC cable's battery connector
until it clicks into place.
2
Connect the AC power supply cable.
Connect the AC power supply cable in the
order 1 and 2 .
DC cable's
battery connector
Insert it all the
way in.
1
2
Removal
1
Set the POWER/MODE switch to OFF, and
check that the mode lamp is off.
(Page 25)
2
While pressing the battery release button,
raise up the battery to remove it.
• Support the battery with your hand to ensure
that it will not fall.
Battery release button
Removal
1
Set the POWER/MODE switch to OFF, and
check that the mode lamp is off.
(Page 25)
2
Remove the DC cable's battery connector
while pressing the battery release button.
3
Disconnect the AC power supply cord from
the power outlet.
• Disconnect the AC power supply cable from
the power outlet when the unit is not going to
be used.
• When the AC power supply cable is
disconnected from the power outlet, the power
lamp on the AC adaptor remains lit for a while
then shuts off. This is not a malfunction.
Mode lamps
21