Panasonic AU-V23HS1 Prosedur Pembaruan Firmware

Jelajahi secara online atau unduh pdf Prosedur Pembaruan Firmware untuk Kamera Digital Panasonic AU-V23HS1. Panasonic AU-V23HS1 5 halaman.

Firmware update procedure

Recording module: AU-VREC1,

Camera module: AU-V23HS1, AU-V35C1

NOTE:

Ver. 2.03: After AU-V35C1 is updated, please perform ABB with the lens cap

fitted on according to the procedure stated in this update manual.

This is for the sensor adjustment needed after 120p mode is newly equipped.

Only the first ABB adjustment after the update is definitive. It cannot be

done over again.

Please be careful because, if it is not successfully completed, the product

will not work correctly when you use it.

1. How to check firmware version

1. Connect Camera module to Recording module. Switch ON the power of the camera recorder.

2. Press MENU button. Select "> SYSTEM SETTINGS >INFORMATION >VERSION" to display the current

version with the Jog Dial button.

Camera module

Recording module

Version display

example

NOTE: The firmware versions of the camera module and the recording module must match to operate this unit.

Firmware of the camera module can be updated only when the recording module is connected.

CAMERA

: AU-V23HS1

SERIAL NO

: H4TAA0003

PRODUCT VERSION : 0.35-06-9.18

RECORDER

: AU-VREC1

SERIAL NO

: L4TAA0004

PRODUCT VERSION : 0.35-06-9.18

button

Jog Dial button