Panasonic DMC-FX07GD Panduan Servis - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Servis untuk Kamera Digital Panasonic DMC-FX07GD. Panasonic DMC-FX07GD 50 halaman.

6.2.

Confirmation of Firmware Version

The Firmware version can be confirmed by ordering the following steps:.

• Step 1. The temporary cancellation of factory setting:

Set the mode dial to "[ Normal picture mode ] (Red camera mark)".

Insert the SD memory card which has a few photo data.

While keep pressing [ Optical Image Stabilizer ] and "[ UP ] of Cross key" simultaneously, then turn the power on.

• Step 2. Confirm the version:

Set the mode dial to "[ Playback ]" and then press [ DISPLAY ] to switch to LCD with indication. (Fig. A)

Press [ Optical Image Stabilizer ] and "[ DOWN ] of Cross key" simultaneously. (No need to keep pressing.)

(The version information is displayed on the LCD with light blue colour letters.) (Fig. B)

CAUTION:

The version information does not display if the LCD has switched to LCD with indication already.

In this case, press [ DISPLAY ] to switch to LCD with indication.

<Point>

• The firmware version and EEPROM version can be confirmed with the information (1).

• The information (2), (3) are just reference.