HP 12500 Series Panduan Referensi Perintah - Halaman 19

Jelajahi secara online atau unduh pdf Panduan Referensi Perintah untuk Beralih HP 12500 Series. HP 12500 Series 34 halaman. 20gbps vpn firewall module
Juga untuk HP 12500 Series: Lembar data (8 halaman)

Halaman Cetak

Examples

# Configure a description for IRF member 1.

<Sysname> system-view

[Sysname] irf member 1 description F1Num001

irf member priority

Use irf member priority to change the priority of an IRF member.

Use undo irf member priority to restore the default.

Syntax

irf member member-id priority priority

undo irf member member-id priority

Default

IRF member priority is 1.

Views

System view

Predefined user roles

network-admin

mdc-admin

Parameters

member-id: Specifies an IRF member ID.

priority: Sets priority in the range of 1 to 32.

Usage guidelines

Change member priority assignment to affect the maser election result. The greater the priority

value, the higher the priority. A member with higher priority is more likely to be the master.

This command is available in IRF mode. The new priority setting takes effect at the next master

election, and does not trigger master election.

To assign an IRF priority to a device in standalone mode, use the irf priority command.

Examples

# Set the priority of IRF member 2 to 32.

<Sysname> system-view

[Sysname] irf member 2 priority 32

Related commands

irf priority

irf member renumber

Use irf member renumber to change the member ID of a device in the IRF fabric.

Use undo irf member renumber to restore the previous IRF member ID of the device.