HP 12500 Series Panduan Referensi Perintah - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Referensi Perintah untuk Beralih HP 12500 Series. HP 12500 Series 34 halaman. 20gbps vpn firewall module
Juga untuk HP 12500 Series: Lembar data (8 halaman)

Halaman Cetak

IRF configuration commands

chassis convert mode irf

Use chassis convert mode irf to enable IRF mode.
Use undo chassis convert mode to restore standalone mode.
Syntax
chassis convert mode irf
undo chassis convert mode
Default
By default, the device operates in standalone mode.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
To set up an IRF fabric, place all its member devices in IRF mode after configuring their member ID,
priority, and IRF port settings. In standalone mode, a device cannot form an IRF fabric with other
devices.
After removing a device from an IRF fabric, change its operating mode to standalone. In IRF mode,
the device forms a single-member IRF fabric, and the IRF protocol still runs on the device to
consume system resources.
Save any configuration you have made before changing the device to operate in a different mode,
because the device will automatically reboot to make the new operating mode take effect.
Make sure you have assigned a member ID to each IRF member device before you enable the IRF
mode. If no member ID is assigned, two hyphens (--) is displayed in the output of the MemberID
field from the display irf-configuration command.
Examples
# Enable IRF mode.
<Sysname> system-view
[Sysname] chassis convert mode irf
The device will switch to IRF mode and reboot. You are recommended to save the current
running configuration and specify the configuration file for the next startup. Continue?
[Y/N]:y
Do
you
flash:/startup.cfg to make it available in IRF mode? [Y/N]:y
Please wait...
Saving the converted configuration file to the main board succeeded.
Slot 1:
want
to
convert
the
content
of
the
1
next
startup
configuration
file