HP 1405-5 Panduan Instalasi dan Memulai - Halaman 18
Jelajahi secara online atau unduh pdf Panduan Instalasi dan Memulai untuk Beralih HP 1405-5. HP 1405-5 45 halaman. 1405 switch series
Juga untuk HP 1405-5: Panduan Memulai Cepat (16 halaman), Panduan Instalasi dan Memulai (44 halaman)
Halaman Cetak
N o t e
2. Verify the Switch Passes Self Test
Before mounting the switch in its network location, you should first verify it
is working properly by plugging it into a power source and verifying it passes
its self test.
1.
Connect the AC/DC adapter's power cord to the power connector on the
back of the switch, and then plug the AC/DC power adapter into a nearby
properly grounded electrical outlet.
The switches are shipped with one of two types of AC/DC power adapter;
either the universal AC/DC adapter with an AC power cord, or the wall plug-
in AC/DC adapter (without an AC power cord).
Connect the wall plug-in
AC/DC power adapter to
the switch and an AC
power outlet
Connect the universal
AC/DC power adapter to
the switch and an AC
power outlet
Figure 2-1. Connecting the switch power adapter
Installing the Switch
Installation Procedures
2-6