HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Panduan Referensi - Halaman 16

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Beralih HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive. HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive 48 halaman. Storageworks modular smart array controller, cache, and battery replacement instructions
Juga untuk HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive: Panduan Administrasi (40 halaman), Catatan Rilis (13 halaman), Petunjuk Memulai Cepat (8 halaman), Catatan Rilis (8 halaman), Catatan Rilis (8 halaman), Panduan Memulai Cepat (7 halaman), Catatan Rilis (5 halaman), Catatan Rilis (5 halaman), Petunjuk Penggantian (4 halaman)

Halaman Cetak
HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Panduan Referensi
Introduction

System Power

Power to the MSA1000 does not shut off completely with the power switch. The
two positions of the front panel power switch should be considered as on and
standby, instead of on and off. The standby position removes power from most of
the electronics and the drives, but portions of the power supply and some internal
circuitry remain active.
Consequently, to remove all power from the MSA1000 storage system, you must
disconnect the power cord from the storage system. In environments with multiple
power supplies, you must disconnect all power cords to remove power completely
from the MSA1000 storage system.

Maximum Storage

A maximum of 14 1-inch Universal drives can be installed in the MSA1000. Up to
two additional external storage enclosures can be cascaded from the MSA1000,
expanding the capacity to 42 drives. Refer to the MSA1000 website:
www.hp.com/go/msa1000, for the most up-to-date information on supported
drives and enclosures.
Note:
storage attached to your MSA1000, you must create multiple logical units.
16
To reduce the risk of electric shock or damage to the equipment,
WARNING:
disconnect power from the storage system by unplugging all power cords from
either the electrical outlet or the storage system.
The maximum size of a logical unit is 2 TB. If you have more than 2 TB of
HP StorageWorks 1000 Modular Smart Array Reference Guide