HP 2520-24 Panduan Pengaturan Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Beralih HP 2520-24. HP 2520-24 5 halaman.

Install the Switch Hardware (Continued)

Wall (or Under-Table): A hardware kit for wall-mounting (or

under-table mounting) is included. Use a #1 Phillips (cross-

head) screwdriver and the 20-mm M4 tap screws (included).

For screw positions, see the mounting hole dimensions on

page 4. (Under-Table: After installation, a third screw may be

used to prevent switch movement.)

For wall-mounting, the network ports may face up or down.

Do not mount the switch with ventilation ducts facing up or

down. (See "Safety Precautions" on page 3.)

Rack Mounting: A special rack-mounting kit is included. Use a #1 Phillips (cross-head) screwdriver to attach the special

brackets to the switch using the eight 8-mm M4 screws. Then use the four number 12-24 screws to secure the brackets to the

rack.

(Optional) Lock the Switch. Use a Kensington lock or similar device (not included) to physically secure the switch.

. Power On the Switch.

Use the cable tie strap to secure the connection.

. Connect Network Cables.

Cable tie strap

M-4 tap

screws

Ventilation