HP 316095-B21 - StorageWorks Edge Switch 2/24 Panduan Petunjuk Instalasi - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Beralih HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 16 halaman. Edge switch release notes
Juga untuk HP 316095-B21 - StorageWorks Edge Switch 2/24: Manual Pembaruan (9 halaman), Manual (41 halaman), Manual (40 halaman), Catatan Rilis (32 halaman), Catatan Rilis (27 halaman), Manual (26 halaman), Catatan Rilis (27 halaman), Catatan Rilis (25 halaman), Panduan Petunjuk Instalasi (24 halaman), Catatan Rilis (23 halaman), Catatan Rilis (23 halaman), Catatan Rilis (22 halaman), Catatan Rilis (23 halaman), Catatan Rilis (19 halaman), Catatan Rilis (19 halaman), Catatan Rilis (18 halaman), Petunjuk Manual (17 halaman), Catatan Rilis (17 halaman), Petunjuk Peningkatan (16 halaman), Petunjuk Manual (16 halaman), Catatan Rilis (16 halaman), Catatan Rilis (17 halaman), Catatan Rilis (17 halaman), Catatan Rilis (11 halaman)

Installation Instructions

Mounting the Slide Rails on the Sides of the Switch

Use these steps to install the slide rails on the sides of the switch as shown in Figure 2.

You will need a torque driver with a T10 Torx bit (not supplied in the kit) and left and

right slide rails to complete this procedure.

NOTE: You may want to remove the Edge Switch 2/24 power supplies, as this will make the

device lighter and easier to handle.

WARNING: Before removing the power supplies, review the edge switch 2/24

installation guide for details on removing power supplies.

1. On the Edge Switch 2/24, remove the six screws (three screws per side) which

help hold the switch cover in place.

NOTE: Do not discard these screws, as you will use them to attach the slide rails.

2. Using the torque driver and the screws you removed earlier, attach the left and

right slide rails to the Edge Switch 2/24.

Figure 2: Attaching the slide rail to the switch

edge switch 2/24 rack mount kit installation instructions