HP 316095-B21 - StorageWorks Edge Switch 2/24 Catatan Rilis - Halaman 14

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Beralih HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 16 halaman. Edge switch release notes
Juga untuk HP 316095-B21 - StorageWorks Edge Switch 2/24: Manual Pembaruan (9 halaman), Manual (41 halaman), Manual (40 halaman), Catatan Rilis (32 halaman), Catatan Rilis (27 halaman), Manual (26 halaman), Catatan Rilis (27 halaman), Catatan Rilis (25 halaman), Panduan Petunjuk Instalasi (24 halaman), Catatan Rilis (23 halaman), Catatan Rilis (23 halaman), Catatan Rilis (22 halaman), Catatan Rilis (23 halaman), Catatan Rilis (19 halaman), Catatan Rilis (19 halaman), Catatan Rilis (18 halaman), Petunjuk Manual (17 halaman), Catatan Rilis (17 halaman), Petunjuk Peningkatan (16 halaman), Petunjuk Manual (16 halaman), Panduan Petunjuk Instalasi (16 halaman), Catatan Rilis (17 halaman), Catatan Rilis (17 halaman), Catatan Rilis (11 halaman)

Known Issues

"Port Properties" Option may be Unavailable in Node List View

If you switch from Hardware View to Node List View, and choose the Product

menu, the Port Properties option may not be available.

Workaround

You must first select a line for a port in the Node List for the Port Properties

option to be available, no port is selected by default. Alternatively, Port

Properties may be viewed by right-clicking the line for a port in the Node List

and choosing Port Properties, or from other views like Hardware View or Port

List View.

Port Diagnostics on All Ports is not Available When All Ports of an Edge

Switch are not Installed and Enabled

The Edge Switch 2/24 and Edge Switch 2/32 basic units have 8- and 16-ports

installed, respectively. The remaining ports can be enabled by purchasing

additional ports and licenses to enable them, in 8-port increments. If all of the

ports are not installed, Port Diagnostics must be run on one port at a time, and the

option to run diagnostics on all ports is not available.

Under the HAFM Product Manager > Hardware View menus, the Configure >

Management Server. . .menu option will result in a pop-up dialog. This dialog

states "This feature has not been installed. Please

contact your sales representative." This feature is not currently

available.

Multiple FC HBA ports in the same host should be placed in separate zones, or

they might be perceived as potential targets (some HBAs log-in as both host and

target).

HA-Fabric Manager Release Notes