HP 6125G Panduan Referensi Perintah - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Referensi Perintah untuk Beralih HP 6125G. HP 6125G 29 halaman. Ethernet blade switch
Juga untuk HP 6125G: Pertanyaan yang Sering Diajukan (4 halaman), Panduan Konfigurasi (43 halaman), Panduan Instalasi (35 halaman), Panduan Referensi Perintah (7 halaman), Panduan Konfigurasi (7 halaman), Quickspecs (11 halaman)
Halaman Cetak
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display irf configuration to display the basic IRF settings.
The command displays each member's current member ID, new member ID, priority, IRF port state, and
IRF port bindings.
The new member ID takes effect after the switch reboots.
Examples
# Display the basic IRF settings.
<Sysname> display irf configuration
MemberID NewID
1
2
Table 2 Command output
Field
MemberID
NewID
IRF-Port1
IRF-Port2
display irf topology
Syntax
display irf topology [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
IRF-Port1
1
Ten-GigabitEthernet1/1/1
2
disable
Description
Current member ID.
Member ID that will take effect after a reboot.
Physical port or ports bound to IRF port 1. If no physical ports are bound to the
IRF port, this field displays disable.
Physical port or ports bound to IRF port 2. If no physical ports are bound to the
IRF port, this field displays disable.
IRF-Port2
disable
Ten-GigabitEthernet2/1/2
3