AQUATECH 565 Series Panduan Pengoperasian - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Sistem Penyaringan Air AQUATECH 565 Series. AQUATECH 565 Series 16 halaman. Hto water refiner series

Halaman Cetak

Figure 15. Injector Assembly View

Shut off the water supply to your softener and reduce the pressure by opening a cold soft water

faucet. Using a screwdriver, remove the two screws holding the injector cover to the control valve

body. Carefully remove the assembly and disassemble as shown in Figure 6. The injector orifice is

removed from the valve body by carefully turning it out with a large screwdriver. Remove the

injector throat the same way. Carefully flush all parts including the screen. Use a mild acid such as

vinegar or Pro-Rust Out to clean the small holes in the orifice and throat.

Reassemble using the reverse procedure.

Resin Cleaner

An approved resin cleaner must be used on a regular basis if your water supply contains iron. The

amount of resin cleaner and frequency of use is determined by the quantity of iron in your water

(consult your local representative or follow the directions on the resin package).