HP ProCurve 5300xl Panduan Tambahan - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Tambahan untuk Beralih HP ProCurve 5300xl. HP ProCurve 5300xl 38 halaman. Access controller xl module to the hp procurve 6400cl/5300xl/3400cl
Juga untuk HP ProCurve 5300xl: Lembar Spesifikasi (12 halaman)

Halaman Cetak

Syntax:

show temperature

Displays the current temperature in degrees Celsius of

the main processor of the ACM module.

Syntax:

show vlans

Displays the VLAN ID, VLAN Name, and Ports for all

VLANs associated with the ACM's uplink and downlink

ports.

Managing the ACM

Once the module is installed and configured, most management tasks are done

on the Access Control Server 740wl or Integrated Access Manager 760wl, using

the Administrative Console. The Access Controller Module is managed in the

same manner as a 720wl. For more information, see the HP ProCurve Secure

Access 700wl Series Management and Configuration Guide, available on the

CD shipped with the ACM, or from the ProCurve Networking Web site at

http://www.hp.com/go/procurve. (Click on Technical support, then Product man

uals (all)).

Using the ACM's Extended CLI

A set of extended commands, available from the Access-Controller context,

may be used to configure an ACM or display its status. These commands are

a subset of the 720wl CLI commands. They are documented in the HP

ProCurve Secure Access 700wl Series Management and Configuration

Guide, available on the CD shipped with the ACM, or from the ProCurve

Networking Web site at http://www.hp.com/go/procurve. (Click on Technical

support, then Product manuals (all)).

To access this context, type the following in the ACM context:

HPswitch(access-controller-id) # enable extended-commands

The command line prompt for the extended context is:

Managing the ACM