HP StorageWorks 1000 - Modular Smart Array Catatan Rilis - Halaman 11

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Beralih HP StorageWorks 1000 - Modular Smart Array. HP StorageWorks 1000 - Modular Smart Array 13 halaman. Power supply, computer
Juga untuk HP StorageWorks 1000 - Modular Smart Array: Manual Jaringan (8 halaman), Daftar Dukungan (34 halaman), Panduan Pencegahan Kesalahan (12 halaman), Buku Putih Teknis (12 halaman), Pembaruan Firmware (9 halaman), Ikhtisar (20 halaman), Panduan Instalasi (2 halaman), Nomor Telepon Dukungan (19 halaman), Panduan Referensi (48 halaman), Panduan Administrasi (40 halaman), Petunjuk Memulai Cepat (8 halaman), Panduan Memulai Cepat (7 halaman), Catatan Rilis (5 halaman), Petunjuk Penggantian (4 halaman), Buku Putih (13 halaman), Ringkasan Teknologi (15 halaman), Quickspecs (17 halaman), Spesifikasi (49 halaman), Panduan Memulai (34 halaman), Instalasi (4 halaman), Panduan Instalasi (18 halaman), Manual Petunjuk Pembongkaran (9 halaman), Manual Pemrograman (8 halaman)

Halaman Cetak

HP StorageWorks 1000 - Modular Smart Array Catatan Rilis

Workaround: To update the IP address in SNMP, execute a switch reset. Note that this is a dis-

ruptive action and should be planned for accordingly.

•

Issue: When upgrading firmware while in maintenance mode, the message "gpg: WARNING:

This key is not certified with a trusted signature ..." is displayed.

Workaround: This message is incorrect and may be ignored.

•

Issue: The switch may have difficulty communicating with a DHCPv6 server with certain options

enabled.

Workaround: Comment out the following lines of the server.conf file on the DHCPv6 server

host:

# provide VoIP parameter (SIP protocol servers and domain names)

# option sip-server 2000::300,2000::302,2000::303,2000::304

# option sip-domain sip1.example.com,sip2.example.com

# provide NIS information (server addresses and domain name)

# option nis-server 2000::400,2000::401,2000::404,2000::405,2000::405

# option nis-domain nis.example.com

# provide NIS+ information (server addresses and domain name)

# option nis+-server 2000::501,2000::502

# option nis+-domain nisplus.example.com

•

Issue: While running QuickTools, if the IP address of the entry switch is changed, online help will

not open.

Workaround: To access the online help, close the current QuickTools session and reopen QuickTools

using the new IP address.

•

Issue: When a new fabric is added, the Fabric Status Bar may incorrectly show a warning condition

related to "Nicknames differ".

Workaround: This warning goes away once the fabric is fully discovered and nickname conflicts

between switches are resolved.

Determining the current firmware version

This section describes how to determine the current firmware version for the 8/20q Fibre Channel

Switch using SSCM, QuickTools, and the CLI.

Using the SSCM

To determine the current version of firmware using the SSCM:

Access the switch properties, using one of the following options:

• On the HBA & Switch Management menu, click Get Switch Properties.

If there is only one switch, it is automatically selected; continue with

than one switch, the Switch Selection dialog box opens; continue with

• On the content pane's Physical Connection map, right-click the switch icon and on the shortcut

menu, click Get Switch Properties.

In the Switch Selection dialog box, select the switch you want to view.

After viewing the switch properties, click OK to close the dialog box.

HP StorageWorks 8/20q Fibre Channel Switch release notes

Step

3. If there is more

Step