HP StorageWorks 16-EL - SAN Switch Panduan Petunjuk Instalasi - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Beralih HP StorageWorks 16-EL - SAN Switch. HP StorageWorks 16-EL - SAN Switch 20 halaman. Fabric os 3.1.2
Juga untuk HP StorageWorks 16-EL - SAN Switch: Manual Pembaruan (9 halaman), Panduan Pengguna (22 halaman), Catatan Rilis Firmware (14 halaman), Catatan Rilis (32 halaman)
Halaman Cetak
Installing the Switch in a Rack Using the SAN Switch
Rack Mount Kit
This section provides instructions for installing the SAN Switch 2/32, SAN
Switch 2/16, or SAN Switch 2/8 in an HP System/e rack, or in an HP 9000 Series
or comparable EIA rack using the SAN Switch Rack Mount Kit, part number
331148-B21.
Figure 1: SAN Switch 2/16 rack-mounted switch
Note:
The following items are required to install the switch in a rack:
8
The Rack Mount Kit installation requires one technician to install a SAN switch.
SAN Switch 2/32, SAN Switch 2/16, or SAN Switch 2/8
Power cables
#2 Phillips screwdriver
7/16-inch wrench or socket
The SAN Switch Rack Mount Kit rails and rail mounting hardware listed
next:
SAN Switch Rack Mount Kit Installation Instructions