HP StorageWorks 7110 - Virtual Array Menggunakan Manual - Halaman 2

Jelajahi secara online atau unduh pdf Menggunakan Manual untuk Beralih HP StorageWorks 7110 - Virtual Array. HP StorageWorks 7110 - Virtual Array 34 halaman. Private loop (hubs/direct connect)
Juga untuk HP StorageWorks 7110 - Virtual Array: Petunjuk Peningkatan (12 halaman), Petunjuk (4 halaman), Manual (4 halaman), Manual (4 halaman), Petunjuk Instalasi (2 halaman), Manual (2 halaman), Manual (1 halaman), Manual (1 halaman)

Halaman Cetak

HP StorageWorks 7110 - Virtual Array Menggunakan Manual

Command

RECOVER

Reconstructs data mapping and array configurations.

REQSENSE

Displays SCSI Sense data for the selected array controller, disk, or JBOD

controller.

RESETARRAY

Resets the selected array.

ROMT

Performs a read only test on the selected disk.

SETOPTIONS

Displays and modifies SCSI mode parameters for the selected array controller.

SHOWENV

Displays the current settings for these variables: CONTROLLER, ENCLOSURE,

LOOPPAIR, RANGE, SLOT, and TESTDEVICE.

SHUTDOWN

Puts the selected array in the shutdown state.

SLOT

Selects the specified disk for testing.

TESTDEVICE

Selects the specified controller, disk, or JBOD LCC for testing.

UNSETVARS

Unsets these variables: DISK, ENCLOSURE, LOOPPAIR, SLOT, and

TESTDEVICE.

UTILINFO

Displays an example of VADIAG commands.

WRTMT

Performs a destructive write/read test on the selected disk.

VADIAG Command Summary

Description