HP StorageWorks 8/24 - SAN Switch Catatan Rilis - Halaman 12
Jelajahi secara online atau unduh pdf Catatan Rilis untuk Beralih HP StorageWorks 8/24 - SAN Switch. HP StorageWorks 8/24 - SAN Switch 30 halaman. Hp storageworks fabric os 6.1.2b release notes (5697-0351, march 2010)
Juga untuk HP StorageWorks 8/24 - SAN Switch: Spesifikasi (20 halaman), Catatan Rilis (29 halaman), Catatan Rilis (32 halaman)
Halaman Cetak
Model
HP StorageWorks 8/80 SAN Switch
Fabric Manager
4/256 SAN Director blade support
Fabric OS 6.1.x is fully qualified and supports the Director blades listed in
Table 2 4/256 SAN Director blade support matrix
Director blade
FC4-16
FC4-32
FC4-48
FC8-16
FC8-32
FC8-48
FC10-6
FC4-16IP (iSCSI blade)
FR4-18i (FCIP/FC Router blade)
DC Director blade support
Fabric OS 6.1.x is fully qualified and supports the blades for the DC Director blades listed in
3.
Table 3 DC Director blade support matrix
Director blade
FC8-16
FC8-32
FC8-48
FC10-6
FC4-16IP (iSCSI blade)
FR4-18i (FCIP/FC Router blade)
12
Earliest compatible ver-
sion
6.1.0a
5.2.0a
Number of blades
Supported with any mix and up to eight of each. No restrictions around
intermix. The 4/256 SAN Director must run Fabric OS 6.x or later to
support the FC8-16 port blade and Fabric OS 6.1.0a or later to support
the FC8-32 and FC8-48 port blades.
Up to a maximum of four blades of this type.
Up to a maximum of two blades of this type. Up to eight FR4-18i blades
can be installed if they are used only for FC Fastwrite or FCIP without
routing.
Number of blades
Supported with Fabric OS 6.1.0a and later with any mix (up to eight
of each). No restrictions around intermix.
Not supported in the DC Director.
Supported with Fabric OS 6.1.0a and later, up to a maximum of four
blades of this type. Up to eight FR4-18i blades can be installed if they
are used only for FC Fastwrite or FCIP without routing.
Recommended version
6.1.0h
5.5
Table
2.
Table