HP StorageWorks 8/24 - SAN Switch Catatan Rilis - Halaman 19

Jelajahi secara online atau unduh pdf Catatan Rilis untuk Beralih HP StorageWorks 8/24 - SAN Switch. HP StorageWorks 8/24 - SAN Switch 30 halaman. Hp storageworks fabric os 6.1.2b release notes (5697-0351, march 2010)
Juga untuk HP StorageWorks 8/24 - SAN Switch: Spesifikasi (20 halaman), Catatan Rilis (29 halaman), Catatan Rilis (32 halaman)

Halaman Cetak

HP StorageWorks 8/24 - SAN Switch Catatan Rilis

Closed defect summary

An "ipfilter --transabort" command running in one Telnet

session can be aborted from another Telnet session.

Cannot set "Portlog events enable" accurately.

The DC Director may ASSERT in a specific test scenario while running

a particular FICON test program (SAK IRNDUP).

Brocade 4-Gb SAN Switch for HP c-Class BladeSystem power-on-self-

test (POST) failure on chassis power on.

Flooding of an unknown inter-switch FDMI command from another

vendor's switch is causing the switch to crash.

DC Director port blades are re-initialized during supportsave.

2-Gb Channels fail to come online from T-Rexx mainframe to a 128-

port 4/256 SAN Director.

Occasional kernel panic during reboot in AG setup.

Under very rare conditions, and in a configuration where there are

multiple paths configured to reach multiple devices, some paths were

observed not coming online.

During fastwrite, a 3rd party device drops a status frame due to

data alignment.

HaFailover not working after upgrading firmware from Fabric OS

5.0 to 5.2.0a using firmrwaredownload -s on each CP.

Heart beat missing being reported by CP - Standby CP reboots.

FICON Virtual Tape Pipelining does not function correctly with specific

tape devices.

Blade fault does not result in LIRR and async status.

Firmware upgrade on 4/8 SAN Switch and 4/16 SAN Switch to

Fabric OS 6.0.0 will cause the switch to report marginal state.

CUP Set Offline inline command not presenting status before going

offline.

Usability: Ctrl-C in legacy configdownload code is not blocked

during downloads.

Switch faults if Management Server Domain is invalid, limited com-

mands available.

When a switch's IDID mode is currently OFF and we disable the switch,

the rest of the switches in the fabric get a premature duplicate message.

Async error reporting events are lost if detected immediately after

switch boot.

Fabric Manager: Configdownload actually downloads all the dis-

ruptive parameters in the Validation step in Fabric Manager, when

the switch is in a disabled state.

Solution

Fixed in Fabric OS 6.1.0

HP StorageWorks Fabric OS 6.1.0h release notes