HP StorageWorks 8B - FC Entry Switch Panduan Petunjuk Instalasi - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Beralih HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 20 halaman. Fabric os release notes version 3.0.1b
Juga untuk HP StorageWorks 8B - FC Entry Switch: Manual Pembaruan (9 halaman), Panduan Pengguna (22 halaman), Catatan Rilis Firmware (14 halaman), Panduan Instalasi (14 halaman), Catatan Rilis (26 halaman), Manual (50 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (37 halaman), Panduan Pengguna (30 halaman), Catatan Rilis (16 halaman)

Halaman Cetak
HP StorageWorks 8B - FC Entry Switch Panduan Petunjuk Instalasi
4. Assemble the outer rails by completing the following steps:
Figure 4: Installing the outer rails (HP 9000 Series or comparable EIA rack)
12
a. Attach the left outer rail and the right outer rails to the rear mounting
brackets using (2) 1/4-20 hex nuts with captive star lock washers attached
loosely as shown in
tightened later in
Figure
4. Don't tighten them. The nuts will be
step
8.
SAN Switch Rack Mount Kit Installation Instructions