HP StorageWorks 8B - FC Entry Switch Catatan Rilis Firmware - Halaman 11

Jelajahi secara online atau unduh pdf Catatan Rilis Firmware untuk Beralih HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 14 halaman. Fabric os release notes version 3.0.1b
Juga untuk HP StorageWorks 8B - FC Entry Switch: Manual Pembaruan (9 halaman), Panduan Petunjuk Instalasi (20 halaman), Panduan Pengguna (22 halaman), Panduan Instalasi (14 halaman), Catatan Rilis (26 halaman), Manual (50 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (37 halaman), Panduan Pengguna (30 halaman), Catatan Rilis (16 halaman)

Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes

Task-Options:

-g Get CSRs and generate a CSR data file

-G Get CSRs (even from switches with certificates)

-i Install Certificates from a data file

-l Licensed Product report compile and generate

Event-Log-file: -e event-log-file

This is the path\file-name of log file created and written to (or if it already

exists, appended to) with event/error data.

Data-file: -d data-file

This is the path\file-name of an input or output file

— If the task-option is Get-CSRs, the file is an output file created and

written to with CSR data.

— If the task-option is Install Certificates, data is read from it.

— If the task-option is Licensed Product report generation, the file is

written to.

Address-file: -a addr-file

This is the path\file-name of optional input file containing IP addresses or

aliases of fabrics to which sessions should be established. If this argument

is not provided, this data is read from the file indicated by environment

variable FABRIC_CONFIG_FILE if defined.

Address-Switch-IP: -A switch-addr

This is the IP address of the switch/fabric to which to connect for the

given task.

Log-Level: -L n

The argument n is a numeric value, 0-3, indicating the level of detail for

information logged to the event log file. This may be provided on the

command line using the -L argument when using interactive mode. This is

used primarily for debug purposes. Values and their meanings are as

follows: 0 = silent; 1 = Error only; 2 = Events + Errors; 3 = Debug-info +

Events + Errors.

Username: -u user-name

The argument user-name is the login used for the one switch IP/Name

given with the -A switch-name argument. If -u is used, a password must

also be provided via the -p argument.

PKI Certificate Installation Utility for Solaris