HP StorageWorks 8B - FC Entry Switch Catatan Rilis Firmware - Halaman 8

Jelajahi secara online atau unduh pdf Catatan Rilis Firmware untuk Beralih HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 14 halaman. Fabric os release notes version 3.0.1b
Juga untuk HP StorageWorks 8B - FC Entry Switch: Manual Pembaruan (9 halaman), Panduan Petunjuk Instalasi (20 halaman), Panduan Pengguna (22 halaman), Panduan Instalasi (14 halaman), Catatan Rilis (26 halaman), Manual (50 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (37 halaman), Panduan Pengguna (30 halaman), Catatan Rilis (16 halaman)

PKI Certificate Installation Utility for WIN32/NT

Important Notes

The following provides important information for Secure Fabric OS and pkicert.

Secure Fabric OS

Secure Fabric OS is a comprehensive security product, which requires some

planning and specific steps to set up and configure. For detailed product

information, refer to the HP StorageWorks Secure Fabric OS Version 1.0 User

Guide.

PKICERT

Table 1

Log-Level: -L n

The argument n is a numeric value, 0-3, indicating the level of detail for

information logged to the event log file. This may be provided on the

command line using the -L argument when using interactive mode. This is

used primarily for debug purposes. Values and their meanings are as

follows: 0 = silent; 1 = Error only; 2 = Events + Errors; 3 = Debug-info +

Events + Errors.

Username: -u user-name

The argument user-name is the login used for the one switch IP/Name

given with the -A switch-name argument. If -u is used, a password must

also be provided via the -p argument.

Password: -p password

The password that goes with the "-u user-name" provided.

lists important information you should be aware of regarding PKICERT.

Secure Fabric OS for Version 3.1.x/4.1.x Firmware Release Notes