HP StorageWorks 8B - FC Entry Switch Panduan Instalasi - Halaman 14

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Beralih HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 14 halaman. Fabric os release notes version 3.0.1b
Juga untuk HP StorageWorks 8B - FC Entry Switch: Manual Pembaruan (9 halaman), Panduan Petunjuk Instalasi (20 halaman), Panduan Pengguna (22 halaman), Catatan Rilis Firmware (14 halaman), Catatan Rilis (26 halaman), Manual (50 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (37 halaman), Panduan Pengguna (30 halaman), Catatan Rilis (16 halaman)

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

Figure 10: Installing the switch into a rack (HP System/e rack)

8. Tighten the nuts installed in

Note:

screw with captive star lock washer from either side of the rack uprights.

9. Continue the installation by returning to one of the following guides as

Addendum Pg

To uninstall a switch, remove the middle #10-32 x 1/2-inch Phillips pan head

appropriate.

a. "Connecting AC Power" on page 45 in the HP StorageWorks SAN Switch

2/32 Installation Guide, Version 4.0.x.

b. "Connecting AC Power" on page 45 in the HP StorageWorks SAN Switch

2/16 Installation Guide, Version 3.0.x.

c. Connecting the power cord in step 8 on page 45 in the HP StorageWorks

SAN Switch 2/8 Installation Guide, Version 3.0.x.

step a

of step 4 on page 5. See

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide

Figure