HP StorageWorks 9100 - Extreme Data Storage System Panduan Pengguna - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih HP StorageWorks 9100 - Extreme Data Storage System. HP StorageWorks 9100 - Extreme Data Storage System 50 halaman. Hp storageworks 3gb sas bl switch installation instructions (496788-002, march 2009)
Juga untuk HP StorageWorks 9100 - Extreme Data Storage System: Petunjuk (4 halaman), Petunjuk Instalasi (3 halaman)
Halaman Cetak
3 Basic operation
Basic operating information includes:
• Powering on / powering off
• Updating system firmware
Powering on/powering off
IMPORTANT:
System devices must be powered on and powered off in a specific sequence. If devices are powered
on or powered off out of sequence, the server may not properly discover the storage or hard drives
might be marked as failed.
IMPORTANT:
Because this device is part of the ExDS 9100 solution, see the ExDS 9100 administration guide for
detailed instructions.
In general, when powering on system devices, first apply power to the devices farthest away from the
server, and then, after each device completes its power-on routine, move toward the server. For example:
1.
Hard drive storage enclosures
2.
Array controller enclosures
3.
Switches
4.
Servers
In general, when powering off devices, first remove power to the server, and then after each device is
powered off, move toward the hard drive enclosures. For example:
1.
Servers
2.
Switches
3.
Array controller enclosures
4.
Hard drive storage enclosures
Updating system firmware
After installing hardware and powering on the enclosure for the first time, be sure to verify that all
components have the latest firmware. For firmware and software updates, see the HP support website
http://www.hp.com/support.
IMPORTANT:
Because this device is part of the ExDS 9100 solution, see the ExDS 9100 administration guide for
detailed instructions.
9100c Extreme Data Storage System user guide
17