HP StorageWorks Brocade Spesifikasi - Halaman 13

Jelajahi secara online atau unduh pdf Spesifikasi untuk Beralih HP StorageWorks Brocade. HP StorageWorks Brocade 16 halaman. Switch for hp c-class bladesystem

Halaman Cetak

QuickSpecs

Technical Specifications

Fibre Channel ports

Device support and

Scalability guidelines

Performance

Certified maximum

Switch core

Fabric latency

Maximum frame size

Classes of service

Port types

Data traffic types

Media types

Laser

Fabric services

Options

Supported software

Management access

Diagnostics

Dimensions

Environment

Brocade 4/12 SAN Switch model:

12 4Gb ports in any internal/external port combination (ships with two 4Gb short wave SFPs)

Brocade 4/24 SAN Switch models:

16 internal 4Gb ports and 8 external 4Gb auto-sensing ports (ships with four 4Gb short wave SFPs)

http://h18006.www1.hp.com/products/storageworks/san/documentation.html

4 Gb/sec line speed, full duplex

Certified maximum information available at:

http://h18006.www1.hp.com/products/storageworks/san/documentation.html

Non-blocking

1.2 µ sec. with no contention, cut-through routing at 4Gb. Latency increases as input port speed

increases and becomes disparate from output port speed.

2112-byte payload

Class 2, Class 3, Class F (inter-switch frames)

FL_Port, F_Port, and E_Port; self-discovery based on switch type (U_Port)

Fabric switches supporting unicast and broadcast

Small Form-Factor Pluggable (SFP) Transceiver. 1/2/4Gb short wave up to 500 m (1,640 ft.) and

1/2/4Gb long wave* up to 10 km

Short-wave and long-wave laser transceivers (SFP's) are supported

Simple Name Server, Registered State Change Notification (RSCN). Includes Advanced WebTools and

Advanced Zoning. Optional fabric services include: Fabric Watch, ISL Trunking, Advanced Performance

Monitoring, and Extended Fabrics.

SFP media, port upgradeable licensing, advanced management software licensing

Telnet, SNMP (FE MIB, FC Management MIB), HP Systems Insight Manager, HP Storage Essentials, HP

Onboard Administrator for BladeSystem, Advanced WebTools, Advanced Zoning, Fabric Manager,

Fabric Watch, and Advanced Performance Monitoring

WebTools, SMI-s provider, SNMP, Telnet, and Secure Telnet

POST and embedded online/offline diagnostics

Depth

Height

Width

Weight

System Inlet Temperature

System Inlet Temperature Operating

System Inlet Temperature

Relative Humidity

DA - 12480

Worldwide — Version 9 — July 13, 2007

Brocade 4Gb SAN Switch for HP c-Class BladeSystem

11.00 in. (with handle protrusion)

1.13 in.

7.63 in.

Approx. 2.85 lb - without media

Non-operating

Operating

Non-operating

10° to 35°C (50° to 95°F) at sea level with an

altitude derating of 1.0°C per every 305m (1.8°F

per every 1000ft) above sea level to a maximum

of 3050m (10,000ft), no direct sustained

sunlight. Maximum rate of change is 10°C/Hr

(18°F/Hr ). The upper limit may be limited by the

type and number of options installed.

System performance may be reduced if operating

with a fan fault or above 30°C (86°F).

-30° to 60°C (-22° to 140°F). Maximum rate of

change is 20°C/Hr (36°F/Hr).

10 to 90% relative humidity (Rh), 28°C (82.4°F)

maximum wet bulb temperature, non-

condensing.

5 to 95% relative humidity (Rh), 38.7°C (101.7°F)

maximum wet bulb temperature, non-

condensing.

Page 13