HP StorageWorks FC Entry Switch 8B Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih HP StorageWorks FC Entry Switch 8B. HP StorageWorks FC Entry Switch 8B 38 halaman. Isl trunking user's guide (version 3.0)
Juga untuk HP StorageWorks FC Entry Switch 8B: Panduan Pengguna (44 halaman), Panduan Pengguna (44 halaman), Panduan Pengguna (38 halaman), Panduan Pengguna (37 halaman), Panduan Pengguna (30 halaman)
Halaman Cetak
Installing Remote Switch
Installing the Remote Switch Using Telnet
Distributed Fabrics User's Guide
A Remote Switch fabric requires two switches that are HP Brocade 2400/2800 or FC 6164
switches with Fabric OS version a2.4.1 or later, or FC Entry Switch 8B, FC Switch 8B, or
FC 16B switches with Fabric OS version 3.0.1b or later installed, with the switches
configured the same.
Installing a Remote Switch requires the installation of a separate license on each of the
two switches. Licenses may have been installed on the switches at the factory. If not,
contact your switch supplier to obtain a license key.
You can install a Remote Switch license either through telnet or through Web Tools.
To install a Remote Switch using Telnet:
1.
Log on to the switch by telnet (refer to the Fabric OS Procedures Guide for details),
using an account that has administrative privileges.
2.
To determine whether a Remote Switch license is already installed on the switch, type
licenseShow on the telnet command line.
A list displays of all the licenses currently installed on the switch. For example:
admin> licenseShow
cQebzbRdScRfcOiK:
Web license
Zoning license
AybbzQQ9edTzccOX:
Fabric license
If a Remote Switch license is correctly listed the feature is installed and immediately
available. Skip steps [3] and [4].
3.
Enter the following on the command line:
licenseAdd "key"
where "key" is the license key provided to you, enclosed in double quotes. The
license key is case-sensitive and must be entered exactly as given. Also, a special
Remote Switch license needs to be installed.
4.
Verify the license was added by entering the following on the command line:
licenseShow
If the Remote Switch license is listed, the feature is installed and immediately
available. If the license is not listed, repeat step [3].
Chapter
2
2-1