HP StorageWorks MSA 2/8 - SAN Switch Panduan Referensi Cepat - Halaman 8
Jelajahi secara online atau unduh pdf Panduan Referensi Cepat untuk Beralih HP StorageWorks MSA 2/8 - SAN Switch. HP StorageWorks MSA 2/8 - SAN Switch 8 halaman. Hp storageworks fabric os commands v3.1.x/4.1.x quick reference guide (aa-rte6b-te, june 2003)
Juga untuk HP StorageWorks MSA 2/8 - SAN Switch: Manual Pembaruan (9 halaman), Catatan Rilis (10 halaman)
Halaman CetakCommand
switchName
switchReboot
switchShow
switchShutdown
switchStart
switchStatusPolicySet
switchStatusPolicyShow
switchStatusShow
switchuptime
syslogdIpAdd
syslogdIpRemove
syslogdIpShow
systemtest
systemverification
tempShow
timeout
topologyShow
trackChangesHelp
trackChangesSet
trackChangesShow
trunkDebug
trunkShow
tsclockserver
tshelp
Legend:
v3.1 unique commands
v4.1 unique commands
v3.1 and v4.1 commands
Definition
Display or set the switch
name.
Halt and bring down the
operational switch.
Display switch and port
status.
Halt the operational switch.
Initialize the switch to
operational.
Set the policy parameters that
determine the overall switch
status.
Display the policy parameters
that determine the overall
switch status.
Display the overall status of
the switch.
Display the amount of time
the switch has been
operating.
Add the IP address of a
syslog daemon.
Remove the IP address of a
syslog daemon.
Display all syslog daemon IP
addresses.
Run a series of diagnostic
tests on a switch blade.
Run a series of diagnostic
tests on all switches in a
fabric.
Display temperature
readings.
Set or show the IDLE timeout
value for a login session.
Display the unicast fabric
topology.
Display information on
track-changes feature
commands.
Enable configuring of
track-changes feature.
Display status of
track-changes feature.
Debug a trunk link failure.
Display trunking information.
Display or set the NTP Server
address.
Display the time service
commands.
Command
tstimezone
turboRamTest
txdpathtest
uptime
uRouteConfig
uRouteRemove
uRouteShow
version
wwn
zoneAdd
zoneCreate
zoneDelete
zoneHelp
zoneRemove
zoneShow
Legend:
v3.1 unique commands
v4.1 unique commands
v3.1 and v4.1 commands
Page 8
Definition
Display or set the system time
zone.
Run turbo SRAM logic test for
2 Gb ASICs.
Run functional test of TXA
and TXD connections.
Display length of time the
system has been operational.
Configure a static route.
Remove a static route.
Display unicast routing
information.
Display firmware version
information.
View WWN of a switch.
Add a member to the zone.
Create a zone.
Delete a zone.
Display help information on
zone commands.
Remove a member from a
zone.
Display zone information.