HP StorageWorks XP10000 - Disk Array Panduan Konfigurasi Sistem - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Konfigurasi Sistem untuk Beralih HP StorageWorks XP10000 - Disk Array. HP StorageWorks XP10000 - Disk Array 49 halaman. Cache lun xp
Juga untuk HP StorageWorks XP10000 - Disk Array: Catatan Rilis (13 halaman), Panduan Administrator (50 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (36 halaman), Catatan Rilis (5 halaman), Panduan Konfigurasi Sistem (43 halaman), Panduan Konfigurasi Sistem (42 halaman), Panduan Konfigurasi Sistem (35 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (38 halaman), Panduan Konfigurasi (34 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (42 halaman), Panduan Pengguna (30 halaman)

In the Disk Segment Parameters screen, enter the new volume name (or verify the

selected volume), and enter the disk segment size. The segment size is the same

as the partition size entered during disk partitioning.

Press ENTER to save the new volume information and return to the Segment List

of Volume Disk screen.

On the Segment List of Volume Disk screen, press F10 to save the new volume

information and return to the volume list.

Repeat the preceding steps until you have assigned all new disk array devices

to volumes. When you are ﬁnished assigning new devices to volumes, press Esc

to save your volume changes.

When the conﬁrmation message appears, click Yes and then press ENTER to save

all changes and return to the Installation Option screen.

NetWare 6.0

Using ConsoleOne select the targeted server, right click, and click Properties.

Click the Media tab, then click NSSPools.

Click New, and input the name for the new pool.

Select the disks to be included in the pool.

After you have created the pool, select Activate on Creation and Cluster Enable

on Creation as desired.

Specify the Virtual Server Name, IP Address, Advertising Protocols and, if

necessary, the CIFS Server Name.

Click Finish.

NetWare 6.5

Enter NSSMU at the server console

In the main menu, select Pools.

Press Insert and enter a name for the new pool.

Select Activate on Creation and Cluster Enable on Creation as desired.

Specify the Virtual Server Name, IP Address, Advertising Protocols and, if

necessary, the CIFS Server Name.

Select Create.

Installation