HP StorageWorks XP10000 - Disk Array Panduan Konfigurasi Sistem - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Konfigurasi Sistem untuk Beralih HP StorageWorks XP10000 - Disk Array. HP StorageWorks XP10000 - Disk Array 49 halaman. Cache lun xp
Juga untuk HP StorageWorks XP10000 - Disk Array: Catatan Rilis (13 halaman), Panduan Administrator (50 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (36 halaman), Catatan Rilis (5 halaman), Panduan Konfigurasi Sistem (43 halaman), Panduan Konfigurasi Sistem (42 halaman), Panduan Konfigurasi Sistem (35 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (38 halaman), Panduan Konfigurasi (34 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (42 halaman), Panduan Pengguna (30 halaman)

Halaman Cetak
HP StorageWorks XP10000 - Disk Array Panduan Konfigurasi Sistem
Example startup.cfg
3.
Restart the server.
4.
To see a list of the failover devices and paths, at the server prompt enter
LIST FAILOVER DEVICES
Example failover device path listing

Helpful Multipath commands

Other useful Multipath commands are described below.
MM Set failover priority <pathid> = <number> </insert>
This command sets the priority level for each path. The ID must be a valid path ID, and
the number must be a decimal integer value in the range 1-4,000,000, with 1 being
the highest priority and 4,000,000 being the lowest priority. The default value of 0
(zero) indicates that there is no priority.
The /insert option will move the priorities on all paths that were equal or lower than
<number>. For example, if the paths had priorities of 1,2,3,4, and a new path is
28
Middleware configuration
SET MULTI-PATH SUPPORT=ON
LOAD ACPIDRV.PSM
######## End PSM Drivers ########
LOAD SCSIHD.CDM AEN
#LOAD CPQSHD.CDM
LOAD IDECD.CDM
######## End CDM Drivers ########
LOAD IDEATA.HAM SLOT=10011
LOAD CPQRAID.HAM SLOT=10019
LOAD QL2300.HAM SLOT=2 /LUNS /ALLPATHS /PORTNAMES/CONSOLE
LOAD QL2300.HAM SLOT=3 /LUNS /ALLPATHS /PORTNAMES /CONSOLE
######## End HAM Drivers ########
0x20 [V6E0-A2-D0:0] HP OPEN-3 rev:HP16
Up 0x0D [V6E0-A2-D0:0] HP OPEN-3 rev:HP16
Up
0x1B [V6E0-A3-D0:0] HP OPEN-3 rev:HP16
0x21 [V6E0-A2-D0:2] HP OPEN-3 rev:HP16
Up
0x0F [V6E0-A2-D0:2] HP OPEN-3 rev:HP16
Up
0x1D [V6E0-A3-D0:2] HP OPEN-3 rev:HP16
0x22 [V6E0-A2-D0:4] HP OPEN-3 rev:HP16
Up
0x11 [V6E0-A2-D0:4] HP OPEN-3 rev:HP16
Up
0x1F [V6E0-A3-D0:4] HP OPEN-3 rev:HP16
0x23 [V6E0-A2-D0:1] HP OPEN-3 rev:HP16
Up
0x0E [V6E0-A2-D0:1] HP OPEN-3 rev:HP16
Up
0x1C [V6E0-A3-D0:1] HP OPEN-3 rev:HP16
0x24 [V6E0-A2-D0:1] HP OPEN-3 rev:HP16
Up
0x0E [V6E0-A2-D0:3] HP OPEN-3 rev:HP16
Up
0x1C [V6E0-A3-D0:3] HP OPEN-3 rev:HP16
Priority = 0 selected
Priority = 0
Priority = 0 selected
Priority = 0
Priority = 0 selected
Priority = 0
Priority = 0 selected
Priority = 0
Priority = 0 selected
Priority = 0