HP StorageWorks XP12000 Panduan Administrator - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Administrator untuk Beralih HP StorageWorks XP12000. HP StorageWorks XP12000 50 halaman. Cache lun xp
Juga untuk HP StorageWorks XP12000: Catatan Rilis (13 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (36 halaman), Catatan Rilis (5 halaman), Panduan Konfigurasi Sistem (49 halaman), Panduan Konfigurasi Sistem (43 halaman), Panduan Konfigurasi Sistem (42 halaman), Panduan Konfigurasi Sistem (35 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (38 halaman), Panduan Konfigurasi (34 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (50 halaman), Panduan Pengguna (30 halaman)

XP RAID Manager and array configurations

HORCM instances

To use XP Virtualization Adapter, HORCM instances X are needed on both sites (primary and

secondary), but remote communications are not needed between the instances. However, if XP

Continuous Access paired volumes are created using XP RAID Manager, remote communications are

needed. For failover testing, HORCM instance X+1 is needed. If HORCM X is not running, XP

Virtualization Adapter uses the auto option (-auto) to start it. XP Virtualization Adapter then tries to

start HORCM X+1.

Figure 3 Manager configuration for XP Virtualization Adapter

Fibre Address conversion table

Because VMware ESX Server uses WWN and LUN number notation for device discovery, the Fibre

conversion table number for HORCM must be changed using $HORCMFCTBL variable.

C:\HORCM\etc> set HORCMFCTBL=3

C:\HORCM\etc> horcmstart

This variable is set to 3 automatically by XP Virtualization Adapter, but if the auto option (-auto) is

used, then the LUN number in horcm.conf must be specified as the same LUN number on ESX

Server or XP Remote Web Console.

XP Virtualization Adapter Administrator Guide