HP StorageWorks XP12000 Panduan Konfigurasi - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih HP StorageWorks XP12000. HP StorageWorks XP12000 50 halaman. Cache lun xp
Juga untuk HP StorageWorks XP12000: Catatan Rilis (13 halaman), Panduan Administrator (50 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (36 halaman), Catatan Rilis (5 halaman), Panduan Konfigurasi Sistem (49 halaman), Panduan Konfigurasi Sistem (43 halaman), Panduan Konfigurasi Sistem (42 halaman), Panduan Konfigurasi Sistem (35 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (38 halaman), Panduan Konfigurasi (34 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (42 halaman), Panduan Pengguna (30 halaman)

Install and configure the host

This section explains how to install and configure the host and host bus

adapters (HBAs) that connect the host to the disk array.

Follow the manufacturer's instructions to load the operating system and

software onto the host. Load all OS patches and configuration utilities

supported by HP and the HBA manufacturer.

Install and configure the host bus adapters using the HBA manufacturer's

instructions.

Verify FC HBA installation and set fabric mode by using wwidmgr:

1. P00 >>> set mode diagnostic

2. P00 >>> wwidmgr -show adapter

The list of adapters is displayed.

3. P00 >>> wwidmgr -set adapter -item xxxx -topology fabric

This sets the HBA for the required fabric mode.

4. P00 >>> wwidmgr -show adapter

The list of adapters is displayed, showing fabric topology.

5. P00 >>> initialize

HP StorageWorks Disk Array XP Operating System Configuration Guide: OpenVMS