HP StoreFabric SN6500B Quickspecs - Halaman 20
Jelajahi secara online atau unduh pdf Quickspecs untuk Beralih HP StoreFabric SN6500B. HP StoreFabric SN6500B 24 halaman. Fibre channel switch
Juga untuk HP StoreFabric SN6500B: Manual Pembaruan (9 halaman)
Halaman CetakQuickSpecs
Technical Specifications
System Architecture
Fibre Channel ports
Scalability
Certified maximum
Interoperability
Performance
ISL Trunking
Aggregate bandwidth
Fabric latency
Maximum frame size
Classes of service
Port types
Data traffic types
c04111398 – DA – 14511 Worldwide — Version 10 — October 10, 2014
HP StoreFabric SN6500B Fibre Channel Switch
Switch mode (default): 48-, 72-, and 96-port configurations (24-port
increments through Ports on Demand [PoD] licenses); universal (E, F, M, D,
EX) ports
Full fabric architecture:
http://h18006.www1.hp.com/products/storageworks/san/
documentation.html
Refer to SAN Design Guide for current configuration information:
http://h18006.www1.hp.com/products/storageworks/san/
documentation.html
4/256 SAN Director
4/64 SAN Switch
4/32B SAN Switch
4/8 SAN Switch
4/16 SAN Switch
8/8 SAN Switch
8/24 SAN Switch
8/40 SAN Switch
8/80 SAN Switch
SN3000B SAN Switch
SN6000B SAN Switch
Encryption SAN Switch
2408 FCoE Converged Network Switch
1606 Extension SAN Switch
DC04 SAN Director
DC SAN Backbone Director
SN8000B 8-Slot SAN Backbone Director
SN8000B 4-Slot SAN Director
Brocade 4Gb SAN Switch for HP c-Class BladeSystem
Brocade 8Gb SAN Switch for HP BladeSystem c-Class
HP 400 MP-Router (Interoperable with FC ports only)
Auto-sensing of 4, 8, and 16 Gbps port speeds;
Frame-based trunking with up to eight 16 Gbps ports per ISL trunk; up to
128 Gbps per ISL trunk. Exchange-based load balancing across ISLs with
DPS included in Fabric OS. There is no limit to how many trunk groups can
be configured in the switch.
3072 Gbps full duplex
Latency for locally switched ports is 700 ns; encryption/compression is 5.5
sec per node; Forward Error Correction (FEC) adds 400 ns between E_Ports
(enabled by default).
2112-byte payload
Class 2, Class 3, Class F (inter-switch frames)
D_Port (Diagnostic Port), E_Port, EX_Port, F_Port, M_Port (Mirror Port);
self-discovery based on switch type (U_Port); optional port type control
Access Gateway mode: F_Port and NPIV-enabled N_Port
Fabric switches supporting unicast
Page 20