HP XP20000/XP24000 Panduan Administrator - Halaman 38

Jelajahi secara online atau unduh pdf Panduan Administrator untuk Beralih HP XP20000/XP24000. HP XP20000/XP24000 50 halaman. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Juga untuk HP XP20000/XP24000: Catatan Rilis (13 halaman), Manual Integrasi (29 halaman), Catatan Rilis (4 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (36 halaman), Catatan Rilis (5 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (46 halaman), Panduan Referensi (46 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (38 halaman), Panduan Konfigurasi (34 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (30 halaman)

Halaman Cetak
HP XP20000/XP24000 Panduan Administrator
5.
Configure array replication from the recovery site (Site B) to the protected site (Site A) for datastores
containing recovered virtual machines.
6.
Create any protection group(s) (P2) at the recovery site (Site B) to protect the recovered virtual
machines at the protected site (Site A).
7.
On the protected machine (Site A) create a recovery plan (R2) for the protection group(s) (P2)
8.
After the virtual machines have been fully replicated to the protected site (Site A), execute recovery
plan R2 at the protected site (Site A) in test mode.
9.
If the test is successful, execute the recovery plan (R2) in recovery mode.
If needed, you can now protect the recovered virtual machines on the protected site (Site A) back to
the recovery site (Site B). To do this, perform the following steps:
1.
Delete the recovery plan R2 from the protected site (Site A).
2.
Delete the protection group(s) P2 at the recovery site (Site B).
3.
Configure array replication from the recovery site (Site B) to the protected site (Site A) for datastores
containing recovered virtual machines.
4.
Create protection group(s) P3 at the protected site (Site A) to protect recovered virtual machines
from the protected site (Site A) to the recovery site (Site B).
5.
Create a recovery plan R3 at the recovery site (Site B) for the protection group(s).
38
Failover and failback with SRM