HP XP20000/XP24000 Panduan Konfigurasi - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih HP XP20000/XP24000. HP XP20000/XP24000 36 halaman. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Juga untuk HP XP20000/XP24000: Catatan Rilis (13 halaman), Manual Integrasi (29 halaman), Catatan Rilis (4 halaman), Panduan Administrator (50 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (36 halaman), Catatan Rilis (5 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (46 halaman), Panduan Referensi (46 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (38 halaman), Panduan Konfigurasi (34 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (30 halaman)

SNMP configuration

The XP family of disk arrays and the SVS 200 support standard Simple Network Management Protocol

(SNMP) for remotely managing arrays. The SNMP agent on the service processor (SVP) performs

error-reporting operations requested by the SNMP manager. SNMP properties are usually set from

the SVP but they can also be set remotely using XP Remote Web Console or XP Command View

Advanced Edition Software. Refer to the applicable user's guide for procedures.

Figure 1 SNMP configuration

HP StorageWorks XP RAID Manager manages HP StorageWorks XP Business Copy Software or HP

StorageWorks XP Continuous Access Software operations from a host server. To use RAID Manager

you must designate at least one LDEV as a command device. This can be done with Remote Web

Console or XP Command View Advanced Edition Software. Refer to the applicable user guide for

information about how to designate a command device.

Creating scripts to configure all devices at once may save you considerable time.

Perform these actions to install and configure the disk array:

Installing and configuring the disk array

Setting the host mode and host group mode for the disk array ports

Setting the system option modes

Configuring the Fibre Channel ports

Installing and configuring the host

Loading the operating system and software

Installing and configuring the FCAs

Clustering and fabric zoning

Fabric zoning and LUN security for multiple operating systems

Configuring VMware ESX Server

Connecting the disk array

Defining the paths

XP Disk Array Configuration Guide for VMware