HP XP20000/XP24000 Panduan Konfigurasi - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Beralih HP XP20000/XP24000. HP XP20000/XP24000 30 halaman. Hp storageworks xp disk array configuration guide: vmware (a5951-96106, september 2010)
Juga untuk HP XP20000/XP24000: Catatan Rilis (13 halaman), Manual Integrasi (29 halaman), Catatan Rilis (4 halaman), Panduan Administrator (50 halaman), Panduan Konfigurasi (42 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (36 halaman), Panduan Konfigurasi (36 halaman), Catatan Rilis (5 halaman), Panduan Konfigurasi (46 halaman), Panduan Konfigurasi (46 halaman), Panduan Referensi (46 halaman), Panduan Konfigurasi (40 halaman), Panduan Konfigurasi (44 halaman), Panduan Konfigurasi (38 halaman), Panduan Konfigurasi (34 halaman), Panduan Konfigurasi (30 halaman), Panduan Konfigurasi (30 halaman)

In XP Command View Advanced Edition, LUN mapping includes:

Configuring ports

Creating storage groups

Mapping volumes and WWN/host access permissions to the storage groups

For details, see HP StorageWorks XP LUN Manager User's Guide or XP Command View Advanced

Edition Device Manager Web Client User's Guide.

Record the LUNS and their ports, WWNs, nicknames, and LDEVs. This information will be used later

to verify host and device configuration.

Verifying disk array device recognition

For the NonStop host to recognize disk devices, the disk devices must first be added, configured, and

started using the installation procedure described in chapter 2 of the Fibre Channel ServerNet Adapter

Installation and Support Guide available at the NonStop Technical Library website:

http://h30163.www3.hp.com/ntl/.

Configure the disk array devices in the same way you would configure any new disk on the host.

Creating scripts to configure all devices at once may save you considerable time.

Refer to Fibre Channel ServerNet Adapter Installation and Support Guide, at the NonStop Technical

Library website:

http://h30163.www3.hp.com/ntl/.

To configure the array disk devices, use SCF commands including ADD, START, and INIT as detailed

in subsection DISK configuration (ESS Connection) of Chapter 2, Installing an FCSA.

XP Disk Array Configuration Guide for NonStop